|
|
 |
|
|
Fire Alarms
-
General Alarms |
|
|
|
|
|
FireLite Fire Alarms
by Honeywell |
|
MS-9600 with DACT-UD - Intelligent
Addressable FACP w/Optional 2nd Loop |
 |
General Info
The Fire•Lite MS-9600 is a compact,
cost-effective, intelligent addressable fire alarm control panel with a
capacity of 318 addressable Fire•Lite devices on one Signaling Line
Circuit (SLC) or a total of 636 addressable points with an optional
second loop (SLC-2). An optional 14.4K Baud modem (DACT-UD) is available
for remote site upload/download and/or remote monitoring. Each Signaling
Line Circuit (SLC) loop supports up to 159 addressable detectors
including photoelectric, photoelectric with heat, ionization,
photoelectric duct, fixed heat, fixed heat with rate-of-rise, and fixed
high-heat detectors. It also supports up to 159 addressable modules
including monitor (twowire detector, normally open devices),
dual-monitor functions (two monitor circuits from one module, two
addresses used), control (for Notification Appliance Circuits), and
relay (two Form-C) modules. The panel uses surface-mount technology and
is designed for ease of installation, programming, and maintenance. It
features the latest in advanced fire protection technology, including
maintenance alert and automatic detector test functions. |
|
MS-9200UD - 198-Point Intelligent Addressable
Fire Alarm Control Panel |
 |
General Info
The Fire•Lite MS-9200UD is a compact,
cost-effective, intelligent addressable fire alarm control panel with a
built-in communicator, remote site upload/download capability and a
capacity of 198 addressable Fire•Lite devices on one loop. The Signaling
Line Circuit (SLC) loop supports up to 99 smoke detectors and 99
control, relay or a variety of monitor modules. The panel is designed
for ease of installation and programming. It features the latest in
advanced fire protection technology, including detector sensitivity
testing with printable results, system auto-programming, maintenance
alert, automatic detector test and drift compensation, and selectable
strobe synchronization.
|
ACC-25/50ZS - Audio Command Center•25/50 Zone
Splitter
Voice Evacuation Control Panel |
 |
General Info
The Audio Command Center•25/50 Zone Splitter System
(ACC-25/50ZS) is a state-of-the-art Emergency Voice Evacuation Panel (EVAC)
capable of splitting up to 50 watts of audio power into up to eight
zones. The ACC•25/50ZS provides the ability to record five
field-programmable messages (up to 60 seconds total message duration)
with an integral commercialgrade emergency communications microphone or
from an external audio source. Significant technological enhancements
set the ACC•25/50ZS apart from other EVAC panels — these include full
supervision in both active alarm and standby conditions, supervision of
amplifier outputs, field wiring, message generator, all tone generators,
and the microphone. The integral power supply is capable of charging up
to 18 AH batteries, which can be housed in the ACC•25/50ZS cabinet.
The ACC•25/50ZS is suitable for use as an adjunct
(slave or stand-alone) to most UL-Listed Fire Alarm Control Panels (FACPs).
An optional 25 watt, 25 VRMS audio amplifier is available for system
expansion to 50 watts or as a secondary amplifier in jurisdictions
requiring such backup. A 70.7 VRMS converter is also available for
independently converting amplifiers to meet retrofit needs.
|
| |
|
|
General Alarms |
|
Vista-50P Control Panel, 6160 Keypad and WAVE-2 Siren |
 |
- Nine hardwired zones standard
- Expandable to 87 total zones
- Eight partitions standard
- 75 user codes work in all partitions
- Seven authority levels
- 224 event memory log/printer option
- Four trigger outputs
- 5800 wireless compatibility
- Supports two-wire multiplex
- Scheduling of events (real time clock)
- Keypad macro features
- Master console option for viewing all partitions at a glance
- Common lobby logic
- Fast downloading
- Supports up to 16 relays
- Quick start programming
- False alarm features
- UL Commercial Burglary listed (VISTA-50PUL)
|
|
|
|
|
|
|
|
|
|
|
